Remove the old water pump by loosing the bolts, cleaning the mounting surface, and inspecting the other cooling system service parts, such as the thermostat, pressure cap, and coolant hoses, before installing the new water pump.
What’s The Torque In A Power Steering Pump?
Torque the power steering pump and bolts to 17 ft-lb (23 Nm) before installing them.
| It is one of the most curious topics of users: | 2010 dodge journey 3.5 water pump location |
| After that, the second most searched topic is: | 2010 dodge journey 3.5 water pump replacement cost |
| And with this, another curious topic: | 2009 dodge journey water pump diagram |
How Do You Tighten A Bolt On A Water Pump?
Use your calibrated elbow to tighten them until they are tight, then go one eighth of a turn further. Tighten both bolts equally in progressive stages; do not tighten one bolt to its maximum and then the other to its maximum.
Note: In addition to the information we have provided in our article on 2010 dodge journey water pump location, you can access the wikipedia link Here, which is another important source on the subject.
How Many Bolts Hold The Water Pump On?
You will require approximately eight bolts with lengths ranging from 1 1/4 to 2 1/4 inches, depending on the location of the missing bolts, for the majority of water pumps. The head width may vary from 13 mm to 15 mm.
How Much Does It Cost To Replace A Water Pump On A 2010 Dodge Journey?
Taking into account all of these factors, you can anticipate spending anywhere from $375 to $787 (including labor and parts).
What Is The Lifespan Of A Car Water Pump?
A water pump typically lasts between 60,000 and 90,000 miles, but some can last longer. Once your car reaches the coveted 100,000 miles, you can usually expect to need a new pump soon. Sometimes, this part of the cooling system will give you signs that it needs to be replaced.
